Setting the Monitor to Power On Automatically

This procedure applies to the Mitsubishi 52" DLP monitor used for Paradise Lost Deluxe.

Your monitor should power on when you turn on the main cabinet power switch.  If this does not happen, it could mean the Power Restore setting has been changed. Do the following to check and change the setting.

  1. Locate the monitor remote control and turn the monitor on.
  2. Press the MENU button on the romote control.
  3. Select POWER RESTORE from the menu that appears, and press ENTER on the remote control to change the setting to ON.
  4. Press EXIT on the remote control to exit the menu.

The monitor should now power on automatically with the cabinet. If it does not, contact Technical Support for assistance at 408.597.3435 or

:: Click below to select a product by category ::
Alphabetical Game List Sports Game List Action Game List Game Room Favorites List Upgrade & Conversion Kit List International Support
customer service contact:
phone: 408.597.3435     fax: 408.597.3437
address: 1380 Piper Drive, Milpitas, California 95035
Site Map      Legal Notices      Privacy Policy
©2013 Global VR Inc.