Redline Rampage Marquee Special-Effects Lighting

The LEDs in the Marquee Guns artwork are controlled by an Arduino Nano PCB, which should be mounted inside the Electronics Access Panel near the other PCBs.  Each LED in the assembly is also hard-wired to a small PCB that controls the function of that individual LED.  The LEDs are connected in series, so if a wire becomes disconnected the LEDs located after the break will not function.

If the lighting is not functioning correctly, check all connections to the Arduino Nano PCB.  If some of the LEDs are not functioning, disassemble the marquee and check connections between the LED controller PCBs.